Yueqing Hualong Mechanical Accessories Factory

Industry News Current Location: Home » NEWS > Industry News >

Daily maintenance measures for the lift cylinder of the cab

Although most brands have carried out strict quality control of the cab lift cylinder. However, if the maintenance work cannot be done well during daily use, once the oil cylinder fails, then the vehicle will not be safe enough to drive. Therefore, the basic maintenance of the cylinder cannot be ignored, and the cylinder can be used for a longer period of time.

Do a good job of preheating

Every time you use the cab to lift the cylinder, you should pay special attention to the test run, first test run, and then confirm that the air in it is emptied, and the preheating work should also be done, so that it will naturally also be able to ensure good The running effect. As long as the trial operation is completed, air or moisture in the system can be avoided, so as to prevent the oil cylinder from burning out or bursting, so the basic operation work cannot be ignored.

Check each link location

There are many link positions inside the lift cylinder of the cab. After a period of use, some loosening problems may occur. Pay attention to the positions of threads, bolts, etc., only in this way can the normal use of a good cylinder be guaranteed. And pay special attention to the inspection of the piston rod position. If there is serious wear, it also needs to be replaced later. The details and positions are well maintained to make the use of the cylinder more secure.


PREV: Several precautions for the wholesale of cab cylinders
NEXT: How to make precise requirements for cab oil pump customization